Design Space Project: Rob and Bob – Turkey Pilgrim Card

This post contains affiliate links. For more information, please see my disclosures here.

This fun Thanksgiving card is from The Best of Rob & Bob image set, which is now included in the Cricut Access subscription. There are some great cards in this set that are quickly and easily made. This project could definitely be done by older children with some supervision.

Supplies I used:

I assembled the turkey body first. I used the Xyron for the tiny pieces.

I put the feather layers on the card next. Since glitter cardstock consists of several layers, I use glue dots to make sure it stays in place and doesn’t curl.

I used the Wavy Blade on the inside portion of the card. This attachment is only for the Cricut Maker and works best on large cuts like this one.

I used 3D foam squares on the turkey body to add some dimension. TIP: Use an old weeding tool to pierce the foam square backing and remove it easily.

He’s so handsome!

Here’s a link to my Design Space file of this project.

The above post contains affiliate links. For more information, please see my disclosures here.

2 thoughts on “Design Space Project: Rob and Bob – Turkey Pilgrim Card

  1. I was looking to make this great turkey and clicked on your link and it’s marked Private so would not load to DS.

Leave a Reply